Divers can experience massive variation between the heat that can be generated during kitting up and waiting around on the surface and the chilly temperature endured at depth, finished off by long decompression stops where typically the lack of physical activity will draw the core temperature even lower.

The Heated Vest System has been designed to effectively apply heat during the decompression stage of your dive utilising you primary light battery by swapping over the underwater pluggable (E/O) cord, or at any time during the dive with an additional canister or E/O ‘Y’ piece. This multifunctional system allows you to build on your existing system components to apply additional heat when you need it during the dive.

• Our heated vest covers the lower back, providing heat to the vital kidney area.

• An output of 36 watts minimises the risk of burning the diver or aggravating the risk of bends through excessive capillary dilation through overheating.

• It can be installed in minutes and can be moved between suits.

• A relay to prevent over-discharge of battery is included as standard.

• It is designed to work safely even in event of a drysuit flood.

The Heated Vest System can be installed in minutes and can be moved between suits or even completely removed during summer months or when the dives do not require the additional heat. This functionality is achieved with an innovative combination switch which replaces your standard dry-suit inflator and routes both power and air through the one inlet as well as incorporating a rotating on / off switch. There is thus no need to make an additional hole in your drysuit for the power supply.

Optional components

• E/O ‘Y’ piece
• 4.5ah battery and canister with E/O cord (burn time 90 minutes)
• 9.0ah battery and canister with E/O cord (burn time 180 minutes)
• 13.5ah battery and canister with E/O cord (burn time 270 minutes)

Download brochure & fitting instructions (12MB)

Find your nearest retailer HERE